Advantages and Installation of the ProAlertViewSonicAlarm

Advantages and Installation of the ProAlertViewSonicAlarm

Finding the right liquid or flow sensor and alarm system is not an easy task and the main reason behind this is the fact that not all alarm systems are designed the same. When it comes to flow control in industrial processes, the benchmark qualities of the right alarm system extend way beyond the simple detection and alert mechanisms that you would find in a typical home alarm. Of course it still has to have these but the point is that it needs to be able to do a lot more, given the sensitivity of the process it controls. This is particularly why the ProAlert 1000 ViewSonic alarm is more popular than other alarm systems in this category.

Some of the main advantages that come with the ProAlert 1000 ViewSonic Alarm provided by Icon Process Controls include the following;

i)                    Full alert; a good alarm system is one that can send out an alert over the widest distance possible to better make sure that people responsible actually receive the message. In this respect, this alarm has a bright, high intensity red light that can broadcast much further than your typical alarm. In addition to this, it also has a 90 dB audible alarm feature. You can imagine how loud that sounds so with the combination of the two features, it’s hardly likely that anyone on site would miss the alert warnings.

ii)                   Very easy to install; unlike many flow sensors and alarm systems, the ProAlert 1000ViewSonic Alarm is very easy to install and you don’t really have to be an expert to do this on your own. The entire installation process is very simple and can be broken down into the following steps;

-          Decide on where you want to mount the alarm. Fortunately the ProAlert 1000 is very small and compact in size (7x5x4.5 inches in dimension) and can be mounted in most places without occupying too much space.

-          Mount the unit. Use the mounting feet that are built into it to make it stick.

-          Plug the 120 volt AC plug into an AC receptacle of similar voltage. It is important to plug it into a separate circuit, different from the flow/sensor circuit. This ensures that any problem with the latter does not affect the operation of the alarm and you are notified of such a problem as well.

-          Following the manufacturer’s instructions that come with the alarm, connect the sensor to the flow system being monitored.

-          Test the sound on the alarm using the switch on its front face. Toggle this switch to all the 3 positions (test, normal and silence) in order to ensure it is working properly

-          Your alarm is ready to use

iii)                 It is economical; the ProAlert 1000 ViewSonic Alarmthat Icon Process Controls supplies requires very little operation and maintenance after installation and it lasts for more than 3 years in perfect condition making it very cost friendly in the long run. The combination of the tough NEMA 4X enclosure and high impact polycarbonate shell not only protect it from physical damage but also from corrosion and damage by chemicals.

Article Sponsorer - levelprosales.com and here is our more products Plastic Level Sensor, Plastic Level Switch, Tank Level Sensor